The Crusher Series that revolutionized the industry.
The special screw brings chips to the center, and the center cutter cuts them.
- As the peripheral part of this special screw cuts chips, the operation progresses most efficiently.
- The special steel cutter in the block form is bolted to the spindle, so that it is economical, durable and easy to replace.
- In case of the entry of foreign objects or overloading, Ohtsuka's original control system automatically detects such abnormality and stops the machine. ( Be sure to remove the foreign objects after the machine has come to a stop. )
- As the peripheral part of this special screw cuts chips, the operation progresses most efficiently.
- The special steel cutter in the block form is bolted to the spindle, so that it is economical, durable and easy to replace.
- In case of the entry of foreign objects or overloading, Ohtsuka's original control system automatically detects such abnormality and stops the machine. ( Be sure to remove the foreign objects after the machine has come to a stop. )
|
Options
Loading Hopper / Stand / Discharge Chute
Click for Drawing
| Model
| Processing Rate |
Screw Length |
RPM |
Motor |
Machine Weight |
Input Conveyor Width |
| KIL-300S
| over not 75kg/H |
300mm |
30/30rpm |
0.75kw200V(50/60Hz) |
80kg |
200 - 400mm |
| KIL-400S
| over not 75kg/H |
400mm |
30/30rpm |
0.75kw200V(50/60Hz) |
90kg |
400 - 600mm |
Note: Actual processing rates and the batch loading volumes will vary depending on the type and shape of the chips to be crushed.
